 |
TPP21WC100P2D2B32
F1A010377
| Quantity: | |
|---|---|
Galvanized sheet steel housing, pivot bearing with a double ball race, screwing by plate with hole pattern 80/77 x 60 mm, housing with material thickness 3.00 mm (fitting) and 2.50 mm (fork), wheel rim made of polypropylene grey with a tread made of thermopl. rubber 65 - 75° shore A grey, hub width 40 mm, ball bearing, screwed wheel axle (incl. all axle material).
| Wheel diameter: | 100 mm |
| Wheel width: | 35 mm |
| Mounting plate: | 105 x 80 mm |
| Mounting hole dimension: | 80/77 x 60 mm |
| Hole diameter: | 9 mm |
| Plate thickness: | 3.0 mm |
| Fork thickness: | 2.5 mm |
| Axle bolt: | 8 mm |
| Hub width: | 40 mm |
| Total height: | 128 mm |
| Wheel center: | polypropylene grey |
| Wheel tread: | thermopl. rubber 65 - 75° shore A grey |
| Wheel bearing: | ball bearing |
| Thread guard: | small plastic threadguard |
| Temperature range: | -20°C to +60°C |
| DIN EN Norm: | DIN EN 12532 |
| Load capacity: | 135 kg |
| Unit weight: |
Galvanized sheet steel housing, pivot bearing with a double ball race, screwing by plate with hole pattern 80/77 x 60 mm, housing with material thickness 3.00 mm (fitting) and 2.50 mm (fork), wheel rim made of polypropylene grey with a tread made of thermopl. rubber 65 - 75° shore A grey, hub width 40 mm, ball bearing, screwed wheel axle (incl. all axle material).
| Wheel diameter: | 100 mm |
| Wheel width: | 35 mm |
| Mounting plate: | 105 x 80 mm |
| Mounting hole dimension: | 80/77 x 60 mm |
| Hole diameter: | 9 mm |
| Plate thickness: | 3.0 mm |
| Fork thickness: | 2.5 mm |
| Axle bolt: | 8 mm |
| Hub width: | 40 mm |
| Total height: | 128 mm |
| Wheel center: | polypropylene grey |
| Wheel tread: | thermopl. rubber 65 - 75° shore A grey |
| Wheel bearing: | ball bearing |
| Thread guard: | small plastic threadguard |
| Temperature range: | -20°C to +60°C |
| DIN EN Norm: | DIN EN 12532 |
| Load capacity: | 135 kg |
| Unit weight: |
