 |
SDPE1C0075P2T2P0N
F1B020022
| Quantity: | |
|---|---|
Galvanized sheet steel housing, pivot bearing with a double ball race, screwing by plate with hole pattern 61.5/56 x 51.5/46.5 mm, housing with material thickness 3.00 mm (fitting) and 2.50 mm (fork), wheel rim made of polypropylene grey with a tread made of thermopl. rubber 95° shore A grey, hub width 56 mm, plain bearing, screwed wheel axle (incl. all axle material).
| Wheel diameter: | 75 mm |
| Wheel width: | 25 mm |
| Mounting plate: | 77 x 67 mm |
| Mounting hole dimension: | 61.5/56 x 51.5/46.5 mm |
| Hole diameter: | 8.5 mm |
| Plate thickness: | 3.0 mm |
| Fork thickness: | 2.5 mm |
| Axle bolt: | 8 mm |
| Hub width: | 30 mm |
| Total height: | 102 mm |
| Wheel center: | polypropylene |
| Wheel tread: | thermopl. rubber 95° shore A grey |
| Wheel bearing: | plain bearing |
| Thread guard: | without threadguard |
| Temperature range: | -20°C to + 60°C |
| DIN EN Norm: | DIN EN 12530 |
| Load capacity: | 100 kg |
| Unit weight: | 580 g |
Galvanized sheet steel housing, pivot bearing with a double ball race, screwing by plate with hole pattern 61.5/56 x 51.5/46.5 mm, housing with material thickness 3.00 mm (fitting) and 2.50 mm (fork), wheel rim made of polypropylene grey with a tread made of thermopl. rubber 95° shore A grey, hub width 56 mm, plain bearing, screwed wheel axle (incl. all axle material).
| Wheel diameter: | 75 mm |
| Wheel width: | 25 mm |
| Mounting plate: | 77 x 67 mm |
| Mounting hole dimension: | 61.5/56 x 51.5/46.5 mm |
| Hole diameter: | 8.5 mm |
| Plate thickness: | 3.0 mm |
| Fork thickness: | 2.5 mm |
| Axle bolt: | 8 mm |
| Hub width: | 30 mm |
| Total height: | 102 mm |
| Wheel center: | polypropylene |
| Wheel tread: | thermopl. rubber 95° shore A grey |
| Wheel bearing: | plain bearing |
| Thread guard: | without threadguard |
| Temperature range: | -20°C to + 60°C |
| DIN EN Norm: | DIN EN 12530 |
| Load capacity: | 100 kg |
| Unit weight: | 580 g |
